Home > Product Information > Electric Power Transmission > Elevators

Product Information

Product Information

Power Transmission, Transformation and Distribution - Elevators

Power Transmission, Transformation and Distribution
Elevators

Portable elevator (Model SVP-100C)

Portable elevator (Model SVP-100C)

SVP-100C

This portable elevator is helpful for transfer to a high place or underground line tunnel. It is also used to ensure the safety and improve the efficiency of field work. In addition, it is available for various applications, such as work at a telecommunications tower or wind power generation tower. This elevator is a compact, lightweight single-person elevator, which can be carried easily.
Since it is equipped with a complete set of safety devices, the operator can lower it while controlling the speed in the event power fails.

Portable elevator (Model SVP-100C)
Maximum pay load 100 kg (including passenger’s weight)
Maximum number of passengers 1
Outline dimensions W 650mm x D 50mm x H 1400mm
Speed 8.4 m/min.
Dead weight Approx. 70 kg

*This product is intended to be used with a limited payload and for limited applications. Please contact us for more information.

Top of this page

Engine-driven elevator (Model SVE-170S2)

Engine-driven elevator (Model SVE-170S2)

SVE-170S2

This elevator is driven by a gasoline engine.
It can be used while being mounted on the inclined surface of a steel tower. It can be raised and lowered through a point where the curvature of the tower changes. In addition, it can easily be disassembled (into four parts) for transportation. It can also be easily mounted.
Since it is equipped with a complete set of safety devices the operator can lower it while controlling the speed in the event power fails.

Engine-driven elevator (Model SVE-170S2)
Maximum pay load 170 kg (including passenger’s weight)
Maximum number of passengers 2
Outline dimensions W 1000mm x D 680mm x H1650mm
Speed Upward: 12.5 m/min.
Downward: 11.0 m/min.
Dead weight Approx. 137 kg
Load by part
Drive 54kg
Front frame 50kg
Floor frame 19kg
Handrails 14kg

* This product is intended to be used with a limited payload and for limited applications. Please contact us for more information.

Top of this page

Motor-driven elevator (Model SVM-200A)

Motor-driven elevator (Model SVM-200A)

SVM-200A

This elevator is driven by an electric motor. It is used at wind power generation towers, in underground shafts, and in stacks at a waste incineration plant.
Since it is equipped with a complete set of safety devices, the operator can lower it while controlling the speed in the event power fails.

Motor-driven elevator (Model SVM-200A)
Maximum pay load 170 kg (including passenger’s weight)
Maximum number of passengers 2
Outline dimensions W 1000mm x D 650mm x H 2000mm
Speed 18 m/min. (50 Hz)
Dead weight Approx. 350 kg

* This product is intended to be used with a limited payload and for limited applications. Please contact us for more information.

Contact
Top of this page

Other search options

Other search options (Click to expand display)
Search Main Products
Inquiries
HomeSitemapInquiriesSite Policy and Privacy PolicyJapaneseTop of this page
SANWA TEKKI CORPORATION
6-4-6 Minami-Shinagawa, Shinagawa-Ku, Tokyo 140-0004, Japan
(c) Copyright 2001-2011 Sanwa Tekki Corporation