Home > Product Information > Electric Power Transmission > Cranes

Product Information

Product Information

Power Transmission, Transformation and Distribution - Cranes

Power Transmission, Transformation and Distribution
Cranes

Climbing jib cranes (Models KS-20, KS-36, KS-65)

These cranes are used in steel tower assembly works for overhead transmission lines. Their jibs are raised and lowered by using hydraulic pressure, thereby providing smooth motion.
These cranes are equipped with various safety devices, such as an overload prevention device and overhoist alarm, which enables safe and efficient tower assembly work.
We have several variations that are fit for various tower heights.

Climbing jib cranes (Models KS-20, KS-36, KS-65) Climbing jib cranes (Models KS-20, KS-36, KS-65)

KS-36

  Hoist capacity with
the maximum rated load
Hoist capacity with
the maximum operating radius
Lift above
ground level
Minimum opening dimensions
at the top of a steel tower
KS-20 2.0t x 10.0m 1.25t x 16.0m 116m 1.3m x 1.2m
KS-36 2.85t x 12.6m 1.5t x 24.0m 124m or 174m 1.6m x 1.6m
KS-65 4.4t x 14.7m 2.7t x 24.0m 254m 2.2m x 3.2m
Top of this page

Low-floor jib cranes (Model KSJ-36)

These cranes are used in steel tower foundation or assembly works for overhead transmission lines. They are also used for the assembly of a climbing crane, the sorting of materials and machinery carried into a construction site, and other similar work.
They can be used with two boom lengths and are operated wirelessly, so that they provide higher work efficiency and safety.

Low-floor jib cranes (Model KSJ-36) Low-floor jib cranes (Model KSJ-36)

KSJ-36

  Hoist capacity with
the maximum rated load
Hoist capacity with
the maximum operating radius
Boom length Operating method
Model KSJ-36 2.85t x 12.6m 1.5t x 24.0m 24 m and 18 m Wireless remote control operation
with a pushbutton switch
Top of this page

Hoisting rods (steel pipe booms)

Hosting rods (steel pipe booms)

Steel pipe booms

This device is used with a pulley to hoist materials in steel tower assembly work and earthing work as well as in a cableway terminal.
It has a steel pipe lattice structure and therefore is light. In addition, it can be split, so that it can be transported easily.
Our lineup includes a variety of boom lengths and hosting loads (less than 2 t) to meet customer needs.

Contact
Top of this page

Other search options

Other search options (Click to expand display)
Search Main Products
Inquiries
HomeSitemapInquiriesSite Policy and Privacy PolicyJapaneseTop of this page
SANWA TEKKI CORPORATION
6-4-6 Minami-Shinagawa, Shinagawa-Ku, Tokyo 140-0004, Japan
(c) Copyright 2001-2011 Sanwa Tekki Corporation