Home > Product Information > Electric Power Transmission > Hydraulic Compression Tools

Product Information

Product Information

Power Transmission, Transformation and Distribution - Hydraulic Compression Tools

Power Transmission, Transformation and Distribution
Hydraulic Compression Tools

Engine-driven hydraulic pump (Model SEP5A)

Engine-driven hydraulic pump (Model SEP5A)

SEP5A

This hydraulic pump is driven by a gasoline engine and is available for both 100-ton heads and 200-ton heads.
It is connected with a compression head through a hydraulic hose so that it is used for conductor/cable compression joint works.
The use of a 4-cycle air cooled engine provides easy actuation and maintenance.

Model SEP5A
Rated pressure 68.6MPa
Pumping power
(discharge quantity)
At low pressure (4.9 MPa): 13.4 l/min.
At high pressure (68.6 MPa): 2.4 l/min.
Outline dimensions W 590mm x D 430mm x H 525mm
Mass Approx. 58 kg
Available fuel Lead-free regular gasoline
Available
compression head
Models SR100C-2, SR100CT-3 and SR200M
Top of this page

Engine-driven hydraulic pump (Model SEP2)

Engine-driven hydraulic pump (Model SEP2)

SEP2

This hydraulic pump is a compact, lightweight hydraulic pump for use with a 100-ton head that is driven by a 4-cycle air cooled engine.
It is connected with a compression head through a hydraulic hose so that it is used for conductor/cable compression joint works.
In addition, it can be used as a single-acting pump in combination with a single-acting compression head of 6 to 100 tons (*1).

Model SEP2
Rated pressure 68.6MPa
Pumping power
(discharge quantity)
At low pressure (2.5 MPa): 5.4 l/min.
At high pressure (68.6 MPa): 0.4 l/min.
Outline dimensions W 425mm x D 225mm x H 360mm
Mass Approx. 25 kg
Available fuel Lead-free regular gasoline
Available
compression head
Models SR100C-2, SR100CT-3
(*1)Models SR40Z, SR100Z
Top of this page

Motor-driven hydraulic pump (Model SMP1)

Motor-driven hydraulic pump (Model SMP1)

SMP1-1

This hydraulic pump is driven by a motor and is to be used with a 100-ton head.
It is connected with a compression head through a hydraulic hose so that it is used for conductor/cable compression joint works.
It is suitable for underground line compression work and indoor compression work.

Model SMP1-1 SMP1-2
Rated pressure 68.6MPa
Pumping power
(discharge quantity) at 50 Hz
At low pressure (4.9 MPa): 5.4 l/min.
At middle pressure (19.6 MPa): 1.0 l/min.
At high pressure (68.6 MPa): 0.5 l/min.
At low pressure (4.9 MPa): 6.5 l/min.
At middle pressure (19.6 MPa): 1.2 l/min.
At high pressure (68.6 MPa): 0.6 l/min.
Outline dimensions W 590mm x D 380mm x H 525mm
Mass Approx. 60 kg
Available power supply AC 100 V, single phase AC 200 V, single phase
Available
compression head
Models SR100C-2, SR100CT-3

(Other voltages can be supported on a case-by-case basis.)

Top of this page

Motor-driven hydraulic pump (Model SMP3)

Motor-driven hydraulic pump (Model SMP3)

SMP3

This hydraulic pump is driven by a motor and is available for both 100-ton heads and 200-ton heads.
It is connected with a compression head through a hydraulic hose so that it is used for conductor/cable compression joint works.
The use of a 3-phase, 200-V power supply enables underground line compression work and other indoor compression work to be conducted quickly and efficiently.

Model SMP3
Rated pressure 68.6MPa
Pumping power
(discharge quantity)
at 50 Hz
At low pressure (4.9 MPa): 10.7 l/min.
At middle pressure (68.6 MPa): 1.9 l/min.
Outline dimensions W 590mm x D 380mm x H 525mm
Mass Approx. 62 kg
Available power supply AC 200 V, 3-phase (50 or 60 Hz)
Available
compression head
Models SR100C-2, SR100CT-3 and SR200M

(Other voltages can be supported on a case-by-case basis.)

Top of this page

Compression head (Model SR100C-2)

Compression head (Model SR100C-2)

SR100C-2

This compression head is a 100-ton hydraulic compression head that is used for conductor/cable compression joint by being connected with a pump through a hydraulic hose.
The top die gate, which can be attached and removed with a single touch, demonstrates its worth even in a work environment where workers are unsteady on their feet (for example, on a power transmission line steel tower).

Model SR100C-2
Nominal compressive force 980 kN (100 tons)
Rated pressure 68.6MPa
Maximum compressible
sleeve diameter
φ76mm
Outline dimensions W 277mm x H 374mm
Mass 33kg
Available pumps Models SEP5A, SEP2, SMP1 and SMP3
Top of this page

Compression head (Model SR100CT-3)

Compression head (Model SR100CT-3)

SR100CT-3

This compression head is a lightweight 100-ton hydraulic compression head made of titanium that is used for conductor/cable compression joint by being connected with a pump through a hydraulic hose.
The top die gate, which can be attached and removed with a single touch, demonstrates its worth even in a work environment where workers are unsteady on their feet (for example, on a power transmission line steel tower).
It is equipped with a digital counter so that the number of times of compression can be ascertained.

Model SR100CT-3
Nominal compressive force 980kN (100 tons)
Rated pressure 68.6MPa
Maximum compressible
sleeve diameter
φ76mm
Outline dimensions W 278mm x H 380mm
Mass 25 kg
Available pumps Models SEP5A, SEP2, SMP1 and SMP3
Top of this page

Compression head (Model SR200M)

Compression head (Model SR200M)

SR200M

This compression head is a 200-ton hydraulic compression head that is used for conductor/cable compression joint by being connected with a pump through a hydraulic hose.
It is able to compress a sleeve or the like of a large diameter and therefore is suitable for the compression of main power transmission lines, underground line cables, and so forth. In addition, the top die gate can be attached and removed with a single touch, so that compression work can be done efficiently.

Model SR200M
Nominal compressive force 1960kN (200 tons)
Rated pressure 68.6MPa
Maximum compressible
sleeve diameter
φ90mm
Outline dimensions W 436mm x H 472mm
Mass 98kg
Available pumps Models SEP5A, SMP3
Top of this page

Compression head (Model SR 300M)

Compression head (Model SR 300M)

SR300M

This compression head is a 300-ton hydraulic compression head that is used for conductor/cable compression joint by being connected with a pump through a hydraulic hose.
It is able to compress large-diameter sleeves of over φ 100 and therefore is used for large-scale power transmission works of Class UHV as well as for the compression of large-diameter underground line cables and the like.。

Model SR300M
Nominal compressive force 2940kN (300 tons)
Rated pressure 68.6MPa
Maximum compressible
sleeve diameter
φ110mm
Outline dimensions W 457mm x H 583mm
Mass 174kg
Available pumps Model SM15
Top of this page

Manual compressor (Models SH-12C2 and SH-12Ct3)

Manual compressor (Models SH-12C2 and SH-12Ct3)

SH-12Ct3

This compressor is a pump/head monolithic compressor that allows manual compression of 12 tons. It uses a double-action method, and its structure does not allow a sleeve to be jammed easily. It is used mainly for the compression joint of distribution lines.
It has a feature to hold the sleeve prior to compression, allowing you to compress precisely.

Model SH-12C2 SH-12Ct3
(titanium head)
Nominal
compressive force
117.7kN (12 tons)
Rated pressure 68.6MPa
Maximum compressible
sleeve diameter
φ30mm
Outline dimensions W 580mm x D 70mm x H 180mm W 580mm x D 80mm x H 180mm
Mass 5.9kg 4.9kg
Top of this page

Hydraulic cutter (Model SRK 48)

Hydraulic cutter (Model SRK 48)

SRK48

Single-purpose frame (optional)

Single-purpose frame (optional)

This hydraulic cutter can be used with various pumps for 100 and 200 tons to cut electric conductors efficiently.
It uses a double-action method, and its structure does not allow its cutting edge to become easily stuck in the conductor.
It can also be used with an optional single-purpose frame to be used with its longitudinal side oriented vertically.

Model SRK48
Rated power 134kN (13.7 tons)
Rated pressure 68.6MPa
Maximum diameter of
conductors that
can be cut

ACSR (Aluminum Conductor Steel Reinforced) of 1,160 mm2 in cross section (φ 46.2 mm)

Hard-drawn aluminum stranded conductor of 1,260 mm2 in cross section (φ 46.2 mm)

Hard-drawn copper stranded conductor of 1,000 mm2 in cross section (φ 41.6 mm)

Aluminum-clad steel stranded conductor of 240 mm2 in cross section (φ 20.0 mm)

Outline dimensions W 414mm x D 96mm x H 194mm
Mass Approx. 9 kg (frame: 6.5 kg)
Available pumps Models SEP5A, SEP2, SMP1 and SMP3

* The cutting edge is consumable and replaceable.

Top of this page

Pole crusher (Model SPC-40)

Pole crusher (Model SPC-40)

SPC-40

This device is a pole crusher that is used with various pumps for the removal of electric poles. The attachment for small diameters makes the pole crusher available for poles of φ 190 to 280 mm. It demonstrates its worth in tight spaces that cannot be accessed by large, heavy equipment.

Model SPC-40
Rated power 343kN (35.0 ton)
Rated pressure 68.6MPa
Outer diameters of poles
that can be crushed
φ 190 to 400 mm
(For poles of φ 190 to 280 mm, an attachment for small diameters, which is supplied with this pole crusher, is to be used.)
Outline dimensions W 680 mm (excluding the handle) × H 620 mm
Mass Approx. 60kg
Available pumps Models SEP5A, SMP3
Contact
Top of this page

Other search options

Other search options (Click to expand display)
Search Main Products
Inquiries
HomeSitemapInquiriesSite Policy and Privacy PolicyJapaneseTop of this page
SANWA TEKKI CORPORATION
6-5-19 Minami-Shinagawa, Shinagawa-Ku, Tokyo 140-0004, Japan
(c) Copyright 2001-2011 Sanwa Tekki Corporation