Home > Product Information > Pipe Hangers, Supports & Snubbers > Variable Spring Hangers

Product Information

Product Information

Pipe Hangers, Supports & Snubbers - Variable Spring Hangers

Pipe Hangers, Supports & Snubbers
Variable Spring Hangers
スプリングハンガ (SPRING HANGER)

     SH-VSA-C         SH-VSB-F

Variable Spring Hangers & Supports are used for supporting piping and equipment where vertical movement is required. They are generally used at points where stress due to load variation does not have a harmful effect on the overall piping system. Allowable load variability is generally within 25% of the design load as described in MSS-SP-58. Evaluations are required where the piping has high flexibility, to ensure stress changes due to the load variation does not overstress the piping system.

Standard Model & Type

(1) Suspension Types (2) Floor Mount Types


Applicable Load and Travel Range

Load Range 0.059kN~248.89kN
Maximum Travel Range 30mm~170mm

Ranges of Load and Travel vary for each Travel Series (VS1, VS2, VSL2, VS4, VSL4) and Sizes (0~23).
For details, please see our Catalog No.2010 HUGR or contact our sales or engineering department.

Standard Design Features of STC Variable Spring Hangers are as follows:

  1. Following types are provided:
    1. Suspension Model & Type --- Model VSA, Type B and C
    2. Floor Mount Model & Type --- Model VSB, Type D and F
  2. A helical coil spring is pre-compressed and enclosed in the hanger casing to minimize its installation height and time of erection.
  3. The spring coils are easily visible for inspection through a full length opening on both sides of the casing.
  4. Extra travel is provided for each spring hanger & support at the upper and lower ends of the scale plate to allow for travel beyond the catalog limit.
  5. Each suspension type hanger (Type B and C) is equipped with a Turnbuckle for field adjustment of hanger rod length.
  6. Type F spring support is supplied with a Load Flange for pipe or pipe shoe mounting.
  7. Load-Travel Indicator is integral with Piston Plate.
  8. Applicable Load Ranges from 0.059kN to 248.89kN
  9. Maximum Travel for each Series
    • VSA 1 --- 30mm
    • VSA 2 ----- 60mm
    • VSA L2 --- 85mm
    • VSA 4 --- 120mm
    • VSA L4 --- 170mm
Top of this page

Other search options

Other search options (Click to expand display)
Search Main Products
HomeSitemapInquiriesSite Policy and Privacy PolicyJapaneseTop of this page
6-4-6 Minami-Shinagawa, Shinagawa-Ku, Tokyo 140-0004, Japan
(c) Copyright 2001-2011 Sanwa Tekki Corporation