ブックタイトルPIPE HANGERS & SUPPORTS
- ページ
- 19/92
このページは PIPE HANGERS & SUPPORTS の電子ブックに掲載されている19ページの概要です。
秒後に電子ブックの対象ページへ移動します。
「ブックを開く」ボタンをクリックすると今すぐブックを開きます。
概要
PIPE HANGERS & SUPPORTS
3.4 Name Plate1) Each data will be etched in each space ① foreach Constant Hanger.2) A mark of passing inspection will be diestampedat square ② .3) The surface of Plate is Black and the printedletters are silver color.3.5 Name Plate, Travel Scale and Travel IndicatorFig. 3-4In case of downward (-) travel, the pre-set should be at TOP (0 position).In case of upward (+) travel, the pre-set should be at BOTTOM (10 position).Note: Name Plate is attached on only one side of the body.Travel Scale is attached on each side of the flame.If the support load is to be changed, the load can be adjusted ±10% against the standard load by turning Load Adjust Bolt. LoadAdjust Index Plate is attached in front of the flame. (Fig. 3-4)3. CONSTANT SPRING HANGERFig. 3-2 Fig. 3-318