ブックタイトルPIPE HANGERS & SUPPORTS
- ページ
- 8/92
このページは PIPE HANGERS & SUPPORTS の電子ブックに掲載されている8ページの概要です。
秒後に電子ブックの対象ページへ移動します。
「ブックを開く」ボタンをクリックすると今すぐブックを開きます。
概要
PIPE HANGERS & SUPPORTS
2.2 Model, Type and Size of Variable Spring HangersSANWA TEKKI's Variable Spring Hanger models are classified by means of the symbols explained in theTable 2-2.12 BL2 CVSA 4 D 0 ～ 23or or orVSB L4 F ー15| | | |Model Travel Type SizeTable 2-2Item Symbol DescriptionModelVSA Model for Variable Spring Hanger, Type B & CVSB Model for Variable Spring Hanger, Type D & FTravel 1, 2, 4, L2 or L4Travel Range for each symbols1=30mm, 2=60mm, 4=120mmL2=85mm, L4=170mmType B, CD, FType Selection for each application;(see Table 2-3 and Fig. 2-1)Size A numeralfrom 0 to 23Indicate sizes(See load deflection chart)2.3 Typical Application of Variable Spring Hangers & Supports2. VARIABLE SPRING HANGERTable 2-3Type Construction ApplicationB,CMost common type. Spring Hanger Unitcan be located at most convenientheight for site inspection by using withupper & lower hanger rods.F To use for supporting a pipe or equipmentfrom ground, floor or support structure.DTo use when space between supportbeam and pipe is not long enough.This type is suitable to be mounted onthe upper beam.Fig. 2-1Type B（twin） Special DesignType B Type C Type F7