SANWA TEKKI CORPORATION

PRODUCTSProduct Information

Electric Power TransmissionElevators

Portable elevator (Model SVP-100C)

ポータブル昇降機(SVP-100C型)

SVP-100C

This portable elevator is helpful for transfer to a high place or underground line tunnel. It is also used to ensure the safety and improve the efficiency of field work. In addition, it is available for various applications, such as work at a telecommunications tower or wind power generation tower. This elevator is a compact, lightweight single-person elevator, which can be carried easily. 
Since it is equipped with a complete set of safety devices, the operator can lower it while controlling the speed in the event power fails.

Portable elevator (Model SVP-100C)
Maximum pay load100 kg (including passenger’s weight)
Maximum number of passengers1
Outline dimensionsW 650mm x D 50mm x H 1400mm
Speed8.4 m/min.
Dead weightApprox. 70 kg

*This product is intended to be used with a limited payload and for limited applications. Please contact us for more information.

Engine-driven elevator (Model SVE-170S2)

エンジン式昇降機(SVE-170S2型)

SVE-170S2

This elevator is driven by a gasoline engine. 
It can be used while being mounted on the inclined surface of a steel tower. It can be raised and lowered through a point where the curvature of the tower changes. In addition, it can easily be disassembled (into four parts) for transportation. It can also be easily mounted. 
Since it is equipped with a complete set of safety devices the operator can lower it while controlling the speed in the event power fails.

Engine-driven elevator (Model SVE-170S2)
Maximum pay load170 kg (including passenger’s weight)
Maximum number of passengers2
Outline dimensionsW 1000mm x D 680mm x H 1650mm
SpeedUpward: 12.5 m/min.
Downward: 11.0 m/min.
Dead weightApprox. 137 kg
Load by partDrive 54kg
Front frame 50kg
Floor frame 19kg
Handrails 14kg

* This product is intended to be used with a limited payload and for limited applications. Please contact us for more information.

Motor-driven elevator (Model SVM-200A)

モーター式昇降機(SVM-200A型)

SVM-200A

This elevator is driven by an electric motor. It is used at wind power generation towers, in underground shafts, and in stacks at a waste incineration plant. 
Since it is equipped with a complete set of safety devices, the operator can lower it while controlling the speed in the event power fails.

Motor-driven elevator (Model SVM-200A)
Maximum pay load170 kg (including passenger’s weight)
Maximum number of passengers2
Outline dimensionsW 1000mm x D 650mm x H 2000mm
Speed18 m/min. (50 Hz)
Dead weightApprox. 350 kg

* This product is intended to be used with a limited payload and for limited applications. Please contact us for more information.

Our ProductsAll Products

Main Products

Product List